Stepless dimming:

1). when the power is OFF, OFF switch from ON,

LED intensity gradually increased from 0% to 100% of full bright state.

2). press the touch, dimming cycle:.

(A) if it is in OFF state, a long time to start the cycle from minimum brightness dimming.

(B) if it is in ON state, in the beginning of the cycle from the current brightness dimming.

(C) if the loop is to high-brightness dimming dimming, raised the maximum is still not release the fingers, the automatic brightness adjustment to a lower, not yet adjusted to the minimum open fingers, then again to the high brightness be adjusted to the required brightness, release your finger .

3).long way by dimming cycle dimming:.

Press cycle during dimming Release your finger to stop the current status of the brightness, and then resume when the press cycle dimming, dimming direction to the direction of dimming, the reverse is the purpose of dimming long process by dimming the brightness adjustment, if overdone, can be modified to the back.