LED Hut

WSDC-RGB150xx series Dream-Color Flexible RGB LED Strip Lights

Part Number : WSDC-RGB150xx

easybanner
Choose your LED Product and BUY!

* Required Fields

RRP $96.95

$96.95

(Price ex. VAT)

Stock Status: In Stock
Buy in Bulk and Save:
Qty Discounts Off Price
1-4
$96.95
5-9
$87.26
10-14
$82.41
15+
$77.56
Email US NOW & PLACE YOUR ORDER: Sales@LEDStripRoom.com
Next Day Delivery - FREE on orders over $199

Cut off time 4pm / 48hr Delivery also available

  • hours

  • mins

  • secs

Time left to qualify for Next Day Delivery

More Views



  • Product Description

Dynamic color chasing, sequencing, changing, and also static color modes available on the WSDC series Dream-Color Controller and RGB Strip. Features unique sequencing modes in addition to the capabilities of our RGB strips, individully addressable LEDs allow for sequencing modes. Flexible Light Strips 5 Meter (16.45ft) long with 150 High Power SMD RGB LEDs (50 ICs) - 12 VDC Operation - Includes mating wire connectors on both sides of strip for end to end connection and 3M adhesive backing. Uses TM1803 controller IC.

Product Specifications:

Beam Pattern: Â 180 degree  
Color:  RGB
Current Draw: Â 2910mA Â 
Current Draw per Foot: Â 178mA
IP Rating: Â Weatherproof IP65 
Number of LEDs in Unit: Â 150 LEDs
LED Type: Â 5050 SMD  
LEDs per Segment: Â 150
Length: Â 500cm(197in)  
Lifetime: Â 40000 Hours
Lumen: Â 360 Lumen  
Lumen Per Foot: Â 22 lm/ft
Lumen Per LED: Â 2.4  
Max Run[1]: Â 1
MCD per Foot: Â 3490  
MCD Per LED: Â 382
Millicandela[2]: Â 57300mcd  
Polarized: Â Yes Â 
Strip Width: Â 14mm
Suitable for Vehicles: Â No  
Total Power Consumption Â 34.9 Watts
Type: Â Flexible Light Strips  
Operating Voltage Range: Â 9~14.8 VDC
Wattage per Foot: Â 2.1 Watts  
Wavelength: Â 470 nm/525 nm/626 nm
Wire Length: Â 6.35cm(2.5in)    
Dimensions: 500cm(196.85") x 1.4cm x 0.21cm(0.08")

All specifications are subject to change without notice 
1. Maximum number of units in one run (end to end) - for higher quantities, multiple runs back to the power supply must be made to prevent excessive voltage drop
2. Royal Blue is binned by radiometric power and peak wavelength rather than photometric lumens and dominate wavelength

Product Information:

Function: Control NDFS-150CK series Light Strips using controller unit or RF remote
Applications: Color selection, change, and chase with speed, direction and length control for accent lighting
Connection Mode: Common Anode (+)
Operating Voltage: 5 Volts DC
Output: 2 SPI signals
Maximum Load Current: -
Output Power: -
Static Power Consumption: 2.2 Watts
Control Method: 6 button on Controller Unit or wireless RF Remote Control
Batteries Required: 23A, 12V battery for Remote (not included)
Modes: 99 Color chasing or changing
Operating Temperature: -25~60°C
Overall Size: (L)94 X (W)58 X (H)26 mm

Standards and Certifications:


LED Strip Room is a brand you can trust, with years of lighting experience, we invest heavily in quality control and sourcing the best component parts available to us.

As the USA's No.1 online LED retailer, at LED Strip Room we pride ourselves on only stocking the highest-quality lighting products, and we are committed to making sure you are 100% satisfied with your purchase. For complete peace of mind, we offer an unrivalled five-year warranty on all our Flexible Light Strip, as well as 30-day hassle-free returns.


WDC6803: 12VDC DREAM COLOR RGB LED CONTROLLER:

The model WDC6803 controller is designed to be used with the NDFS-150CK series Silicone Enlcosed RGB Flexible Light Strip. Control the sequence mode, chase length, and speed of 99 different dynamic chasing patterns from the RF Remote Controller or directly on the RGB Controller unit. The Dream-Color systems controls each RGB LED in the strip independently.

Note:

1.)VERY IMPORTANT: Supply voltage for Controller is 12 Volts DC, power with included 12VDC Power Supply, do not exceed 

2.)VERY IMPORTANT: Supply voltage for NFD150X series Light Strips is 5 Volts DC, 12 Volts will destroy the NFD150X series LED Strip 


3.) Connect according to the drawing below.
4.) + (plus) and - (minus) #IC buttons will only work when unit is off. 
5.) Each Controller has a handheld Remote matched to it and will only work with it's matched remote. One remote cannot operate multiple controllers.
6.) Strip can be trimmed down to length by cutting it every 2 LEDs. If this is done waterproofing accessories are required on end that was cut.

Features:

150 High power SMD RGB LEDs (50 ICs)
Dynamic color chasing, sequencing, changing
Static color modes
Adhesive backing
Silicone encased

TYPICAL WIRING SCHEMATIC:



1. Program Window

Indicate current running program numbered from 01-99 "HL" stands for auto loop mode. When in HL mode the display alternates between "HL" and the current program

2. Speed Window
Indicates current running running speed from 01-99. The greater the number the faster the speed and vice-versa.

3. Turn On/Stand By
Press this key to power the unit on, or switch it into standby mode. The display will show the running unit length value in standby mode.

4. Pause/Play
Toggle between Play and Pause. The display blinks with the current value when Pause mode.

5/6. Next/Previous Program
Jump to the next or the previous program.

7/8. Speed up/Slow down
Programs run faster when pressing "Speed up" and run slower when pressing "Slow down". A 99 in the speed window indicates the top speed and '01' indicates the slowest. The speed may vary depending on what program is running.

9/10. Running unit length Increase/Decrease
Used to increase or decrease the program running unit length. The window will display a number starting with the letter 'L'. This number will vary from 16-200 with a greater number corresponding to a longer unith length. This number is a relative value does not have a strict relation to the LED numbers. In some programs the running speed may drop when the unit length increases.

11. Remote Antenna
The distance of the remote control can be increased by pulling out this antenna.

12. Power Input
The power input socket is on the side of the unit (see 12 on the diagram). Power requirements for different models are listed below.

13. Outputs
There are two output jackets on the bottom of the unit (see 13 on the diagram). Pin functions are listed below.

All specifications are subject to change without notice:

What are the difference between waterproof IP65, IP67 and IP68 ?
1:Non-waterproof LED Strip: PCB (Printed Circuit Board) with 3M self-adhesive back.--(For Indoor).
2:Waterproof LED Strip--Surface Injection  IP65: PCB surface is encapsulated with plastic Gel, with self-adhesive 3M back, --(For Outdoor & Indoor).
3:Waterproof LED Strip--Silicon Tube IP67: PCB is encapsulated with silicon tube, with plastic fastener,better waterproof, --(For Outdoor).
4:Waterproof LED Strip--Whole Injection IP68: PCB both surface and back are encapsulated with plastic Gel, with plastic fastener, top level of waterproof, --(For Outdoor).

Application:

Back lighting
Cove LED lighting
Display case LED lighting
Accent LED lights
Under cabinet lighting

Aluminium Profiles:

To maintain the life and high efficiency of the LEDs the LED Strips should be mounted directly onto a heat conducting surface, such as aluminium, to dissipate heat. LEDs don't produce much heat compared to traditional lighting, but the heat produced needs to be managed, or the LEDs may overheat and be damaged with loss of light output. We recommend aluminium profiles to dissipate the heat.  

For more information, please see our terms and conditions or email sales@ledstriproom.com to speak to a member of our customer service team.
  • Reviews:








Date Added: 08/22/2014 by cody schlegel
the product is used to provide a slate covered wall with a washed light from above and has exceeded expectations for wow factor.
Date Added: 08/22/2014 by Stéphane Forest
Easy to fit and good lighting on worktops

LED Strip | LED Flood Light | LED Lights | LED Light Bulbs | LED Wall Washers | Flexible LED Strip | Site Map


Copyright © 2024 LED Strip Room Inc. St. Hong Kong, CN.